Multi-layer PCB: the beneficial of UV protection
UV three-proof paint is beneficial to improve the production efficiency of automated production lines and effectively improve product yield. As Multi-layer PCB knows that, in actual use, according to process requirements and characteristics, you can choose machine spraying, manual gluing, etc., partial or entire board glue coating, and then curing by UVLED curing equipment to achieve the three-proof effect. The main advantages are as follows:
1. Environmental protection and safety
1.1. UV glue does not contain VOC volatiles and does not pollute the ambient air;
1.2. There are relatively few restrictions or prohibitions on UV glue components in environmental protection laws and regulations;
1.3. No solvent, low flammability.
2. Economical and cost-saving
2.1. UV glue has a fast curing speed, which is conducive to automated production lines and improves labor productivity;
2.2. Testing and handling can be carried out after curing, saving space;
2.3. UVLED curing equipment is a cold light source, often (low) temperature curing, saving energy. For example, the energy required to produce 1g of light-curing pressure-sensitive adhesive only needs 1% of the corresponding water-based adhesive and 4% of the solvent-based adhesive. It can be used for materials that are not suitable for high temperature curing. Compared with thermosetting resin, the energy consumed by UV curing can save energy consumption by 90%;
2.4. Small size, less area, saving space;
2.5. UV glue coating only needs a very thin layer, which saves the amount and reduces the cost;
2.6. One-component system, no need to mix, easy to use.
3. Compatibility
3.1. Materials that are sensitive to temperature, solvents and moisture can be used;
3.2. The curing time, curing degree, etc. are adjustable, making the operation more intelligent and convenient;
3.3. It can be applied repeatedly and cured for many times;
3.4. UVLED curing equipment can be easily installed on the existing production line without major changes;
3.5. UV three-proof glue, for the shadow area that cannot be irradiated by UV light, it can be cured by secondary moisture.
Other news about S&L
- Sun&Lynn Circuits CO., Ltd. was invited to attend the Sixth Global Customs AEO Conference!
- Celebrating the Establishment of SUNLYNN CIRCUITS(THAILAND)
- Good News! Sun&Lynn Circuits Co.,Ltd. is honored as one of the Top 100 Innovative Enterprises in Bao
- What Should You Know about Metal Core PCB?
- FPC supplier : the types of Flexible PCB
- PCB manufacturer China:Why PCB board snake line, what is it used for?
- What is Metal Core PCB and types of Metal Core PCB?
- Why are High frequency PCBs much more expensive than normal PCBs?
- Flexible PCB supplier China :When to use flexible PCB?
- Flexible PCB manufacturer:What Is Flex Soldering?
Your browsing history
- What is High frequency PCB? Everything you need to know
- Top 5 Advantages of Metal core PCBs
- Health care PCB manufacturer:What is medical PCB?Types of Medical PCBs
- What is an Inverter PCB
- FPC manufacturer:WHAT IS THE DIFFERENCE BETWEEN PCB FABRICATION AND PCB ASSEMBLY PROCESS
- What is Immersion Silver of Multi-layer PCB
- The Evolution of Metal Core PCB Method
- What Are the Types of Rigid Flexible PCB?
- High frequency PCBs
- FPC manufacturer tells you the Advantages and disadvantages of FPC flying probe testing
A total of -comments【I want to comment】